Page 131 - FlexcoCatalog2010

SEO Version

70
www.flexco.com • phone: 1-630-971-0150
P R O D U C T H A N D B O O K
The Alligator
®
V-Belt Fastening System is
designed to grip the ends of a v-belt without
interfering with the sheaves (pulleys) that
the belt passes around.
Staples or nails are driven through the
fastener and belt and folded over. They
are then hammered tight against the
bottom plate of the fastener clinching the
belt between the fastener plates. There is
nothing that protrudes beyond the sides
of the belt that would interfere with the
sheaves.
Applications
Installation Method WhatYou Need
for Installation
• Power Transmission
• Agricultural Harvesting
• Manufacturing
These fasteners are inserted into a
holder/tool along with the belt end.
The staples/nails are driven through
the splice and when complete, the
entire assembly is removed from the
holder. Insert the hinge and the belt is
ready to be run.
• Fasteners
• Hinge Pin
• Staples/Nails
• Holder/Tool
• Rocker Pin Tools
• 1 lb. Hammer
How to Specify
the Correct Alligator
®
V-Belt Fastener
Fastener Metal
Selection
Hinge Pin Selection
The fastener size is determined by the
belt size that you use. Simply choose
the fastener that corresponds to your
belt, A312, B437, or C531.
Steel.
Standard fastener material.
Rocker Pins are included with the
fasteners.
ALLIGATOR
®
V-Belt Fastening System