Page 20-21 - KeyFireCatalog2010

c Hydrostatic Testing
Stock Lengths: Standard lengths are 50 and 100 feet.
c Finished Hose
Markings: Beginning at a point not less than four feet
from the end, each fifty foot section shall be stencilled in
indelible ink with letters at least one inch high stating the
name of the manufacturer, month and year of
manufacture, and service test to 300 PSI. The ink used
will be of a contrasting color.
Methods Testing: All measurements and tests
necessary to determine compliance of the fire hose
specified requirements shall be made with ASTM, UL and
NFPA 1961 designation, unless otherwise prescribed.
c Couplings
Expansion ring threaded or as required by purchaser.
c Weights & Measures
Key reserves the right to modify any specification
without prior notice to meet or exceed changing
standards. Customers are advised that special diameters
or construction characteristics can be produced on
special request. For more information, please contact
your Key Fire Hose Corporation authorized distributor.
c Scope
Quality: The fire hose assembly supplied under this
specification shall be constructed with superior quality
materials observing USDA Forestry 5100-187 specifications.
NFPA 1961 standards shall be observed in production of the
assembly, in order to ensure its quality and durability.
Service Life: Hose furnished under these specifications
will have a potential service life warranty of two years;
barring mistreatment that would render it unfit for service.
Upon delivery, the hose shall be free from defects in
workmanship and materials. Any defective hose will be
replaced at no charge.
c Jacket Construction
The jackets will be woven evenly and be free of defects,
including knots, lumps, or unsightly disfigurations that
could jeopardize the integrity of the hose assembly. The
warp yarn shall consist of filament polyester yarn. The
filler yarns shall be constructed of high strength, low
elongation, filament polyester to reduce weight and
increase flexibility.
c Lining
The lining shall be a single-ply extruded tube of synthetic
polyurethane to resist ozone. The polyurethane tube shall
adhere to the jacket to prevent delamination. The finished
product will meet and exceed all potable water Mil-H-24606B
standards for the manufacturing of lightweight fire hose. The
use of the polyurethane lined fire hose is designed to increase
packing ability and applications where lightweight fire hose is
desired.
PHONE 1-800-447-5666 • FAX 1-800-447-5664 • E-MAIL sales@keyfire.com
Single Jacket Specification Sheet
• 600 Pound Test Heavy Duty Light Weight
• Polyurethane Lined
• 1”, 1 1/2”
Visit us on the Web: www.keyfire.com
Size 1” 1-1/2”
Test Pressure 600psi 600psi
Elongation 4% 5%
Twist per foot 71o right 64o right
Warp 10” 10”
Rise 4 3
Burst Test 900psi 900psi
Kink Test 500psi 500psi
Part # SP10-600-187 SP15-600-187
Coil Diameter 13” 14”
Size 1” 1-1/2”
Bowl Size 1-1/4” 1-3/4”
Weight per 100’ length (uncoupled) 8 10
Weight per 100’ length (coupled) 12 13
06/05 KF-085
c Hydrostatic Testing
Stock Lengths: Standard lengths are 50 and 100 feet.
c Finished Hose
Markings: Beginning at a point not less than four feet
from the end, each fifty foot section shall be stencilled in
indelible ink with letters at least one inch high stating the
name of the manufacturer, month and year of
manufacture, and service test to 300 PSI. The ink used
will be of a contrasting color.
Methods Testing: All measurements and tests
necessary to determine compliance of the fire hose
specified requirements shall be made with ASTM, UL and
NFPA 1961 designation, unless otherwise prescribed.
c Couplings
Expansion ring threaded or as required by purchaser.
c Weights & Measures
Key reserves the right to modify any specification
without prior notice to meet or exceed changing
standards. Customers are advised that special diameters
or construction characteristics can be produced on
special request. For more information, please contact
your Key Fire Hose Corporation authorized distributor.
c Scope
Quality: The fire hose assembly supplied under this
specification shall be constructed with superior quality
materials observing USDA Forestry 5100-187 specifications.
NFPA 1961 standards shall be observed in production of the
assembly, in order to ensure its quality and durability.
Service Life: Hose furnished under these specifications
will have a potential service life warranty of two years;
barring mistreatment that would render it unfit for service.
Upon delivery, the hose shall be free from defects in
workmanship and materials. Any defective hose will be
replaced at no charge.
c Jacket Construction
The jackets will be woven evenly and be free of defects,
including knots, lumps, or unsightly disfigurations that
could jeopardize the integrity of the hose assembly. The
warp yarn shall consist of filament polyester yarn. The
filler yarns shall be constructed of high strength, low
elongation, filament polyester to reduce weight and
increase flexibility.
c Lining
The lining shall be a single-ply extruded tube of synthetic
polyurethane to resist ozone. The polyurethane tube shall
adhere to the jacket to prevent delamination. The finished
product will meet and exceed all potable water Mil-H-24606B
standards for the manufacturing of lightweight fire hose. The
use of the polyurethane lined fire hose is designed to increase
packing ability and applications where lightweight fire hose is
desired.
PHONE 1-800-447-5666 • FAX 1-800-447-5664 • E-MAIL sales@keyfire.com
Single Jacket Specification Sheet
• 600 Pound Test Heavy Duty Light Weight
• Polyurethane Lined
• 1”, 1 1/2”
Visit us on the Web: www.keyfire.com
Size 1” 1-1/2”
Test Pressure 600psi 600psi
Elongation 4% 5%
Twist per foot 71o right 64o right
Warp 10” 10”
Rise 4 3
Burst Test 900psi 900psi
Kink Test 500psi 500psi
Part # SP10-600-187 SP15-600-187
Coil Diameter 13” 14”
Size 1” 1-1/2”
Bowl Size 1-1/4” 1-3/4”
Weight per 100’ length (uncoupled) 8 10
Weight per 100’ length (coupled) 12 13
06/05 KF-085