Page 313 - ParkerBrassCatalog2010

Parker Hannifn Corporation
Parker Brass Products Division
Otsego, Michigan
K27
K
Brass Hose Barb Ball Valves Series 500HB
Advantages
Parker’s forged body ball valve provides extended service life and
resists failure caused by severe temperature applications. Optimum
fow design assures maximum system effciency. Highly inert PTFE
seats and seals provide resistance to chemical corrosion. The hose
barb end confguration eliminates as ftting and possible leak path.
Parker also provides a blow-out proof stem, chrome plated brass ball
and a specially designed handle enabling increased turning leverage
for ease of opening and closing. Parker’s ball valve can be readily
identifed assuring high quality engineering and reliability. Parker’s ball
valve bodies are machined from high quality CA 377 forgings.
Applications
Parker’s industrial ball valve product line is intended for general
purpose use. Please be aware that ball valves are intended for use in
the fully open or closed positions. Depending on application conditions,
throttling of the valve may result in premature seal failure and/or
inability to turn the valve handle. For use on construction equipment,
chemical processing, plastic and rubber manufacturing, pumps, power
units, and specialized industrial machinery requiring total shut-off
capability.
Brass Hose Barb Ball Valve XV500P-HB
PART port port 2 b c flow
no. 1 PTF HEX hex H L M N dia. d
XV500P-12-16HB 1 3/4* 1-1/4 1-5/16 3.96 6.25 3.41 2.81 .685
*PTF special extra short
Working Pressure and Temperature
150 psi WOG and 350° F
Saturated steam service up to 150 PSI and 350° F
Vacuum, 29 Inches of Mercury
Operating Instructions
Quarter turn is “ON” or “OFF”.
(Provides positive stop action for full shutoff.)
Note: Periodically check the adjustable packing nut and tighten
as required.
L
N
H
M
POrT
2
END CAP
POrT
1
HEX
B
HEX
C