Full PDF Catalogs
<< Previous Page
to open this page in a new window.
Next Page >>
Forestry-187 Single Jacket Specification Sheet · 600 Pound Test Heavy Duty Light Weight · Polyurethane Lined · 1", 11/2" S H cope ydrostatic Testing Stock Lengths: Standard lengths are 50 and 100 feet. Quality: The fire hose assembly supplied under this Size 1" 1-1/2" specification shall be constructed with superior quality Test Pressure 600psi 600psi materials observing USDA Forestry 5100-187 specifications. Elongation 4% 5% Twist per foot 71o right 64o right NFPA 1961 standards shall be observed in production of the Warp 10" 10" assembly, in order to ensure its quality and durability. Rise 4 3 Burst Test 900psi 900psi Service Life: Hose furnished under these specifications Kink Test 500psi 500psi will have a potential service life warranty of two years; barring mistreatment that would render it unfit for service. F inished Hose Upon delivery, the hose shall be free from defects in Markings: Beginning at a point not less than four feet workmanship and materials. Any defective hose will be from the end, each fifty foot section shall be stencilled in indelible ink with letters at least one inch high stating the replaced at no charge. name of the manufacturer, month and year of manufacture, and service test to 300 PSI. The ink used J acket Construction will be of a contrasting color. The jackets will be woven evenly and be free of defects, Methods Testing: All measurements and tests necessary to determine compliance of the fire hose including knots, lumps, or unsightly disfigurations that specified requirements shall be made with ASTM, UL and could jeopardize the integrity of the hose assembly. The NFPA 1961 designation, unless otherwise prescribed. warp yarn shall consist of filament polyester yarn. The C ouplings filler yarns shall be constructed of high strength, low Expansion ring threaded or as required by purchaser. elongation, filament polyester to reduce weight and W eights & Measures increase flexibility. Part # SP10-600-187 SP15-600-187 Coil Diameter 13" 14" L ining Size 1" 1-1/2" Bowl Size 1-1/4" 1-3/4" The lining shall be a single-ply extruded tube of synthetic Weight per 100' length (uncoupled) 8 10 polyurethane to resist ozone. The polyurethane tube shall Weight per 100' length (coupled) 12 13 adhere to the jacket to prevent delamination. The finished product will meet and exceed all potable water Mil-H-24606B Key reserves the right to modify any specification standards for the manufacturing of lightweight fire hose. The without prior notice to meet or exceed changing standards. Customers are advised that special diameters use of the polyurethane lined fire hose is designed to increase or construction characteristics can be produced on packing ability and applications where lightweight fire hose is special request. For more information, please contact your Key Fire Hose Corporation authorized distributor. desired. KF-085 06/05