Full PDF Catalogs
<< Previous Page
to open this page in a new window.
Next Page >>
Catalog 3501E General Technical Thread Designations and Standards for Threads Used in Fluid Connectors Abbreviation Description Applicable Std. Straight Pipe NPSC American Standard Straight Pipe Threads in Pipe Couplings ANSI B1.20.1 Couplings FED-STD-H28/7 NPSF Dryseal American Standard Fuel Internal Straight Pipe Threads (generally SAEJ476 used in soft or ductile materials to mate with NPTF external taper threads) ANSI B1.20.3 FED-STD-H28/8 NPSI Dryseal American Intermediate Internal Straight Pipe Threads (for brittle or SAE J476 hard materials; intended to mate with PTF-SAE short external taper threads) ANSI B1.20.3 FED-STD-H28/8 NPSM American Standard Straight Pipe Threads for Free-Fitting Mechanical Joints ANSI B1.20.1 for Fixtures (these threads fit freely over NPTF threads. They are used in FED-STD-H28/7 swivel nuts of 07 adapters) Taper Pipe ANPT Aeronautical National Taper Pipe Threads (similar to NPT with various MIL-P-7105 additional requirements in gaging) NPT American Standard Taper Pipe Threads for General Use ANSI B1.20.1 FED-STD-H28/7 NPTF Dryseal American Standard Taper Pipe Threads (used in all of our steel and SAE J476 brass fittings) ANSI B1.20.3 FED-STD-H28/8 PTF -- Dryseal SAE Short Taper Pipe Threads (mainly used in low pressure pneumatic SAE J476 SAE Short and fuel applications) ANSI B1.20.3 FED-STD-H28/8 PTF -- Dryseal Special Short Taper Pipe Threads ANSI B1.20.3 SPL Short1) PTF -- Dryseal Special Extra Short Taper Pipe Threads ANSI B1.20.3 SPL Extra Short1) Unified Threads UN Unified Constant Pitch Threads (standard series: 4, 6, 8, 12, 16, 20, 28, 32) ANSI B1.1 FED-STD-H28/2 UNC Unified Coarse Threads ANSI B1.1 FED-STD-H28/2 UNEF Unifed Extra Fine Threads ANSI B1.1 FED-STD-H28/2 UNF Unified Fine Threads ANSI B1.1 FED-STD-H28/2 UNS Unified Special Pitch Threads ANSI B1.1 FED-STD-H28/3 UNJ Unified Controlled Root Radius Threads ANSI B1.15 FED-STD-H28/4 M Table A48 -- Thread Designations and Standards for Threads Used in Fluid Connectors (continued on the next page) 1) Used in some pneumatic components where shortened thread depth is required because of lack of enough material due to component size limitations. M7 Parker Hannifin Corporation Parker Brass Products Division Otsego, Michigan