Full PDF Catalogs
<< Previous Page
to open this page in a new window.
Next Page >>
MATERIALHANDLINGFlexibleConnectors&EndsMATERIALHANDLINGEndsFlexibleConnectors&® Hose information is subject to change. For full details, visit our website or contact Customer Service. FLEXSEALTM ENDS (Beaded Ends) Resistance: Flexseal Ends are designed to be used where Varies hose must be joined to another hose or pipe for carrying acids and other chemicals, abrasive Branding: materials and fluids that must be kept uncontaminated by metals. Hose I.D. is None unrestricted. O.D. end is flared out by building the reinforcement and rubber around an angle steel ring and extending the tube out and over the enlargement. Around each end, behind the Cover Color: N/A flare, a split flange is used with either 150 lb. or Oil Resistance: Varies, depending on polymer used in compound 300 lb. drilling. To join two Flexseal Ends, they Construction: are aligned without twisting the hose. Bolts are Tube: N/A inserted and drawn tight. This compresses the rubber hose ends together making a leakproof Cover: N/A seal. No gasket is required. Beaded end. Reinforcement: N/A Temperature Range: Varies, depending on the polymer used in compound Packaging: Hand built $250.00 minimum order per size Nominal I.D. Working Pressure (inches) (mm) (psi) (Mpa) 1-1/2" to 10" 38.1 to 254 100 0.69 12 304.80 70 0.48 14 355.60 60 0.41 18 457.20 50 0.34 20 508.00 50 0.34 FLEXSEALTM CONNECTORS Resistance: Flexseal Connectors allow full flow in the pipeline. Designed for working pressures from 50 to 100 psi, depending on the inside diameter Branding: of the connector. The natural rubber tube is abrasion and acid resistant. No metal touches None the material being carried. Flexseal is available with or without wire reinforcement. The wire-reinforced type has a helix(es) of steel wire buried in the hose to keep it from collapsing Cover Color: N/A under full suction. Used in both suction and Oil Resistance: Limited discharge services. Non wire-reinforced type Construction: only recommended for pinch-valve or discharge Tube: Natural rubber, 3/16" thick service, where material handled cakes in the tube. Split flanges are drilled to bolt companion Cover: SBR standard flat-face flanges. They provide a tight Reinforcement: N/A seal without a gasket. Since the flanges rotate Temperature Range: -40°F to +160°F freely, alignment of the bolts is easy, thus -40°C to +71°C reducing installation time to a minimum. Service Packaging: Hand built $250.00 minimum order per size involving operating temperatures over 150°F should be reviewed with Salisbury. Flexseal Connectors are short lengths of hose for joining metal piping, thereby putting non-rigid couplings into the lines. Made of thick flexible rubber, they absorb vibrations and prevent the transmission of noise and damaging vibrations through the metal pipes. As a result, pumps, controls, valves and other equipment have longer life. Non-wire Reinforced Wire Reinforced Nominal I.D. Working Pressure Working Pressure (inches) (mm) (psi) (Mpa) (psi) (Mpa) 1-1/2 38.10 100 0.69 100 0.69 2 50.80 100 0.69 100 0.69 2-1/2 63.50 100 0.69 100 0.69 3 76.20 75 0.52 75 0.52 4 101.60 75 0.52 75 0.52 5 127.00 70 0.48 60 0.41 6 152.40 60 0.41 50 0.34 8 203.20 50 0.34 50 0.34 10 254.00 50 0.34 50 0.34 12 304.80 50 0.34 50 0.34 72