Page 287 - Catalog4400.pdf
SEO Version
B-195
Hose Products Division
Parker Hannifn Corporation
Wickliffe, Ohio
82 Series Fittings
Catalog 4400 US
Use with 801, 804, 821, 821FR, 831, 836 hoses.
Assembly Instructions
l
i itti
82 Series
Assembly Instructions
1. Identify over all length (OAL) of hose assembly and the cut off
allowance (COA) length of ftting(s) on hose ends by use of
the ftting data table.
2. Properly measure and mark hose. Cut hose squarely with a
Parker Push-Lok cut-off tool or a sharp knife.
3. Lubricate the Push-Lok ftting, hose I.D., or both with light
oil or soapy water only - DO NOT USE HEAVY OIL OR
GREASE.
4. Insert ftting into hose until frst barb is in the hose.
5. Place end ftting against a fat object such as a work bench or
wall. Grip hose approximately one inch from end and push
with a steady force until the end of the hose is covered by the
yellow plastic cap.
Disassembly Instructions
1A. Leave ftting in place, and cut hose approximately one inch
lengthwise from the yellow plastic cap. IMPORTANT: Be
careful not to nick barbs when cutting hose.
2A. Grip hose frmly and give it a sharp downward tug away
from the ftting for disassembly.
Caution:
Insert the Push-Lok ftting all the way into the Push-
Lok hose until the cut end is concealed by the yellow
plastic cap.
Caution:
Sealing integrity may be damaged by use of exterior
clamps.
IF YOU HAVE QUESTIONS CONCERNING THE PRODUCTS
OR APPLICATION OF THE PRODUCTS CONTAINED IN THIS
CATALOG, PLEASE CALL:
PARKER HOSE PRODUCTS DIVISION
TECHNICAL SERVICES DEPARTMENT
PHONE: 440 / 943-5700
FAX: 440 / 943-3129
OAL : Straight to 90° Elbow
1
5
1A
2A
OAL
Powered by FlippingBook Publisher