28
M M
M
F
G
Toll Free Phone 1-888-821-5725
www.midlandindustrial.com
Push On Barb Fittings
Typical Application:
Low Pressure Air, Fuel,
Lube, and Oil Lines
Material:
CA360 Brass
•
Pressure determined by tube material and hard-
ness. Midland Parts have been tested to max 150
PSI.
Advantages:
Easy assembly. No clamps needed!!
•
Assembly Instructions
1-
Lubricate insert.
2-
Hold hose at angle as shown & push on and up over
first barb.
3-
Continue to push straight on until hose is seated under
protective plastic cap. Keep hands back from hose end
area so that hose can expand.
Actual Profile of Push On Barbs
•
Disassembling Instructions
1-
Split hose as shown above. Do not cut completely
through hose. Sealing edge of barb could be damaged.
2-
Bend hose and remove with a quick pull.
CHINESE PROVERB: "THE BEST TIME TO PLANT A TREE WAS 20 YEARS AGO.
THE SECOND BEST TIME IS NOW."
B
RASS
PUSH ON HOSE BARB
BRASS FITTINGS
1 /4 "
5 /1 6 "
3 /8 "
. 47
. 41
.
3 4 5
1 /2 "
5 /8 "
3 /4 "
.
60
.
7 2 5
. 85