Brass Fittings
DPL714
877.963.4966 •
dixonvalve.com
346
I
Push-On Fittings
Rigid Tube x Push-On Hose Barb
Push-On Hose Menders
Tool for Push-On Fittings
Dixon push-on fittings are intended for use with Lok-On (push-on style) hose only
.
No hose clamps or ferrules are
needed. Push-On fittings will properly grip Lok-On hose only when pushed all the way in, with the cut end of the hose
completely concealed by the plastic cap.
Hose ID
Tube OD
Brass
Opt Qty
Part #
Price/E
¼"
3/16"
294-0403
$4.32
100
¼"
1/4"
294-0404
2.86
100
¼"
5/16"
294-0405
4.00
100
⅜"
3/8"
294-0606
3.32
50
½"
1/2"
294-0808
4.92
50
⅝"
5/8"
294-1010
7.28
25
¾"
3/4"
294-1212
11.29
25
Hose ID
Brass
303
Stainless
Opt
Qty
Part #
Price/E
Part #
Price/E
1/4"
BPM2
$3.00
SSPM2
$34.37
100
5/16"
BPM25
3.60
---
---
100
3/8"
BPM3
3.40
SSPM3
39.28
50
1/2"
BPM4
5.50
SSPM4
43.61
50
5/8"
BPM5
7.86
---
---
20
3/4"
BPM6
9.25
---
---
15
1"
BPM8
16.15
---
---
10
Features:
•
cuts push-on style hose and inserts the fitting
•
Built-in cutter slices through ¼" - ¾" ID reinforced push-on hose without fraying.
•
Clamp hose into tool's vice and apply light pressure on handle to drive in the fitting.
•
tool has four 7/16" diameter mounting holes for bench mounting
•
overall size is 13½" long x 2-⅜" wide x 7" height
Size
Part #
Price/E
¼" - ¾"
270
AT
$1143.00
Hose Assembly Tool
Caution: Push-on fittings will properly grip push-on hose only when pushed all the way in, with the cut end of the hose
completely concealed by the plastic cap.
Assembly Instructions:
1.
Trim hose end with smooth square cut
2.
Lubricate either push-on fitting, hose or both.
3.
Insert push-on fitting into hose until first barb is in hose.
4.
Place end of fitting against a flat object (bench, wall, etc.)
and grip the hose one inch from end. Push with a steady
force until end of hose is covered by yellow plastic cap.
Disassembly Instructions:
1.
Leaving push-on fitting in place, make a 1" cut in the hose
along the barbed end of the fitting. Note: Be careful not to
nick barbs when cutting the hose.
2.
With firm grip on hose, give a sharp downward pull to
release the fitting from the hose.
Part #
Price/E
HHCI
$220.00
•
installs ¼", 5/16" and ⅜" hose fittings
•
lightweight, portable, comfortable cushioned grip
•
economical
Push-On Caps
Hose ID
Part #
Price/E
1/4"
2720400
W
$0.14
5/16"
2720500
W
0.13
3/8"
2720600
W
0.18
1/2"
2720800
W
0.22
5/8"
2721000
W
0.23
3/4"
2721200
W
0.29
1"
2721600
W
4.31