Fire Fittings
527
DPL714
877.963.4966 •
dixonvalve.com
P
uses ⅜" rod:
<30 ft lbs required to adjust
Field Adjustable Pressure Reducing Valves
Features:
•
U/L listed
•
allows flexibility during installation with the ability to adjust
settings once installed as hydraulic conditions change
•
used in applications where the inlet pressure is greater than
175
PSI
•
¼"
NPT gauge ports - both sides, drilled and tapped
standard
•
⅜"
adjusting rod included
•
available tamper switch (
42-019-01587
),
consult Dixon
6.10"
. "
.6 "
1 . "
1 "
1 "
1 .
"
add 1" to height
for groove body
7.75"
5.75"
. "
"
"
.
"
add 2" to width for groove body
Setting Instructions:
1.
Determine desired outlet pressure for known inlet pressure.
2.
Remove the tamper-resistant screw and slide the plastic cover up to access the adjusting nut.
3.
Use a ⅜" diameter rod in any one of the 6 holes in the adjusting nut and rotate counter
clockwise to increase the pressure at the outlet.
4.
Check valve under pressure under static and under the anticipated flowing conditions to
ascertain that the setting produces the expected results.
Dimensions
angle valves
1
Inlet
Outlet
Cast Brass
Part #
Price/E
Wt.
Lbs.
2½"
FNPT
2½"
MNST
FAPRAV250F
$1329.40
35
2½"
FNPT
2½"
FNPT
FAPRAVF250
1329.40
35
2½"
groove
2½"
MNST
FAPRAVG250F
1329.40
35
2½"
groove
2½"
groove
FAPRAVG250G
1329.40
35
straight valves
2
Inlet
Outlet
Cast Brass
Part #
Price/E
Wt.
Lbs.
2½"
groove
2½"
groove
FAPRVG250
$1329.40
35
2½"
FNPT
2½"
FNPT
FAPRVF250
1329.40
35
angle valve
1
straight valve
2