Parker Hannifin Corporation
Fluid System Connectors
Otsego, Michigan
D10
Catalog 3501E
PTC Composite Push-In
Air Brake Fittings
Applicable Tube
Tube
Material:
SAE J844 type A & B nylon tubing
Tube O.D.:
1/4, 3/8, 1/2, 5/8, 3/4
Design of the PTC composite air brake fitting complies with the
performance requirements of D.O.T. FMVSS 571.106, SAE J1131 and
SAE J2494-3. Tube support design assures maximum flow.
Materials of Construction
Fitting Body:
Composite
Collet:
Brass
Tube Support:
Stainless Steel
O-ring:
Buna N
Threads:
Brass
Nomenclature
Example: 369ptc-6-4
Attribute:
396
Male Elbow 90°
ptc
Composite Push-In
Air Brake Fitting
6
3/8" (6/16)
Tube Size
4
1/4" (4/16)
Pipe Thread
Assembly Instructions
1.
Cut tubing squarely–maximum of 15° angle allowable.
•
Use of Parker tube cutter PTC-001 is recommended.
2.
Check that port or mating part is clean and free of debris.
3.
Insert tubing into fitting until it bottoms.
•
Push twice to verify that tubing is inserted past collet and O-Ring.
4.
Pull on tubing to verify it is fully inserted.
5.
To disassemble, simply press release button, hold against body, and pull tubing out of fitting.
Note: in order to pass hot pull requirements of
SAE FMVSS 571.106 and SAE J2494-3 a tube support
must be present in the end of the fitting before final fitting assembly.
Insert tubing until it bottoms
Depress button to remove tubing
PTC-001
Specifications
pRESSURE
RANGE:
Up to 250 PSI
Temperature
Ranges:
-40
° to +200°F