Parker Hannifin Corporation
Fluid System Connectors
Otsego, Michigan
J4
Catalog 3501E
Pipe Fittings
Applicable Tube
Tube Material:
Copper, brass, iron pipe
Thread size:
1/8, 1/4, 3/8, 1/2, 3/4, 1
All pipe fittings meet functional requirements of SAE J530 and SAE
J531. Threads are made to Dryseal standards.
Materials of Construction
Fittings:
CA345, CA360, CA377
Nomenclature
Example: 2214P–2–2
Attribute:
2
Extrusion
1 (
not Shown)
Forging
214
45
° Street Elbow
p
Pipe
2
1/8"
Pipe Thread
2
1/8"
Pipe Thread
Specifications
pRESSURE
RANGE:
Up to 1,000 PSI
Temperature
Ranges:
-65
° to +250°F
Pipe thread assembly guide (turns
method) for Dryseal threads with
pre-applied Vibra Seal
Straight Fittings
1.
Tighten external thread into the internal
thread.
1.
Tighten an additional 2 revolutions with
a wrench up to 1/2 in. male pipe thread.
Above 1/2 in., 11/2 to 21/2 revolutions.
Elbow or Tee Fittings
2.
Tighten external thread into the internal
thread.
3.
Tighten an additional 1 to 11/2 revolutions
with a wrench.
4.
Tighten fitting, Clockwise, to Align with
Tubing (never counter clockwise).
Note: To minimize the possibility of a leaking
threaded joint after assembling male to female
pipe threads, neither end should be backed
out (loosened) once the assembly has been
made.
Finger Tight
Wrench Tight
Finger Tight
Wrench Tight
Clockwise to align