Parker Hannifin Corporation
Fluid System Connectors
Otsego, Michigan
N5
Catalog 3501E
General Technical
Parflex/Atlantic
Fluoropolymer Tubing
Polyflex
Tubing
PS = Plastic sleeve & tube support recommended
TS = Tube support is recommended
BS = Brass sleeve recommended
CL = Clamp required
PTFE Fluoropolymer
Inch (3/32” - 1.1”) Metric (3mm - 16mm)
PVDF Fluoropolymer
Inch (2,3,4,5,6,8,10,12,16)
TPU Polyurethane (52 shore D)
Inch (2,2.5,3,4,5,6,8) Metric (3,4,6,8,10,16)
Polyamide (Nylon)
Inch (2,3,4,5,6,8,10,12) Metric (3mm - 22mm)
Polyethylene
Inch (2,4,6,8,10) Metric (4,6,8,10,12,16)
Product Sizes (inch)
PS
TS
PS
TS
PS
TS
Compression - Inch
(2,3,4,5,6,7,8,10,12,14)
Compression & Flare
TS
TS TS
Compress-Align - Inch
(2,3,4,5,6,8,10,12,14,16)
TS
Metru-Lok - Metric
(4,6,8,10,12,14,16,18,22)
BS
Poly-Tite - Inch (2,3,4,5,6,8)
TS TS
Hi-Duty - Inch (2,3,4,5,6,8,10)
45
degree flare - Inch
(2,3,4,5,6,8,10,12,14)
Inverted Flare - Inch
(2,3,4,5,6,8,10,12,14)
Fast & Tite - Inch (4,5,6,8,10)
Flow Controls - Inch (2,2.5,4,5,6,8)
Metric (4,6,8,10,12)
Push-to-Connect
Prestolok Brass - Inch (2,2.5,3,4,5,6,8)
Metric (4,5,6,8,10,12,14)
Prestolok Composite
Inch (2,2.5,3,4,5,6,8) Metric
(4,5,6,8,10,12,14)
Liquifit - Inch (4,6,8)
TrueSeal - Inch (4,5,6,8)
Par-Barb - Inch (2,3,4,5,6,8,10,12)
Barb
Dubl-Barb - Inch (2.5,4,6,8)
Hose Barb - Inch (2,3,4,5,6,8,10,12,16)
Inside Diameter
Garden Hose
NTA - Inch (3,4,6,8,10,12)
DOT Transportation
Transmission Fittings - Inch (2,2.5)
Air Brake - Inch (4,6,8,10,12,16)
Air Brake Hose - Inch (6,8)
Vibra-Lok - Inch (2,3,4,5,6,8,10,12)
Prestomatic - Inch (2,2.5,3,4,6,8,10,12)
Metric (6,8,10,12,16)
PTC - Inch (4,6,8,10,12)
SAE Cartridges - Inch (2.5,4,6,8,10,12)
Manifolds - Inch (4,6,8)
Tubing Compatibility Chart
Every hydraulic, pneumatic and lubrication
system requires some form of tube line
fabrication and fitting installation for completion.
Proper fabrication and installation are essential
for the overall efficiency, leak free performance,
and general appearance of any system.
Start by planning ahead. After sizing the tube
lines and selecting the appropriate style of
fitting, consider the following in the design of
your system:
1.
Accessibility of joints
2.
Proper routing of lines
3.
Adequate tube line supports
4.
Available fabricating tools
Tube Line Fabrication
Guide for Leak Free
Systems