Parker Hannifin Corporation
Tube Fittings Division
Columbus, Ohio
http://www.parker.com/tfd
R23
4300
Catalog
Equipment
Dimensions and pressures for reference only, subject to change.
Fig. R51 — Parflange
®
1025
Machine
Fig. R52 — Flanging Pin
Fig. R54 — LB 2000
CAUTION:
Extension cords are
not
recommended and could
cause damage to the machine
due to a lack of power supply.
Fig. R53 — Flanging Die Set
Parflange
®
1025
Bench-Top 90° Flanging and 37° Flaring System
Tooling must be ordered separately
•
Eliminates braze joint
•
Compact, lightweight design
•
Bench mountable
•
Easy to operate
•
Available in 110-volt single-phase or 440-volt 3-phase
(
please specify by ordering 1025/110 or 1025/440)
•
Flanges or flares tube in less than 20 seconds
•
For tube sizes 1/4" O.D. thru 1-1/2" O.D. (steel); and
1/4"
O.D. thru 1" O.D. (stainless steel) - Flanging/flar-
ing of tube sizes 1” & greater results in heavy machine
vibration. Therefore, this machine is only recommended
for occasional use for preparing tube ends 1” or larger.
Tooling is also available for comparable metric tube sizes.
Electrical Power: 110V/20A single-phase, or 440V/3-phase/
2.1
A
Power Cable Length: 8 feet long (2.5 meters)
Dimensions: Height: 18 1/8 inches (460mm)
Width: 15 3/8 inches (390mm)
Depth: 26 3/8 inches (670mm)
Weight: Basic Unit: 175 lbs. (80 kg.)
Each Die (typical): 4 lbs. (1.8 kg.)
Flanging Pin Lubrication Fluid:
LB2000
See Bulletin 4390-1025A or 4390-1025 for more details.
A DVD is included to provide instructions for proper use.
COMPONENTS REQUIRED
Part Name
Part No.
Parflange 1025 (110 volt)............................................................
1025/110
Parflange 1025 (440 volt)............................................................
1025/440
Flanging Pin................................................................................ See page R23
Flanging Die Set. ........................................................................ See page R23
Flaring Pin................................................................................... See page R31
Flaring Die Set............................................................................ See page R31
Lubrication Fluid..........................................................................
LB 2000
Die Adjustment Shims (Old Style Dies Only)..............................
Shim Kit
REPLACEMENT PART
Part Name
Part No.
Tube Stop....................................................................................
1025/0281014
Flanging Tools
link