F-13
Parker Hannifin Corporation
Quick Coupling Division
Minneapolis, MN
www.parker.com/quickcouplings
A
Pneumatics
B
Hydraulics
E
Valves
C
Thermoplastics
F
Diagnostic
D
Swivels
Appendices
Diagnostic Products
SensoControl
®
The Service Master Plus
™
Diagnostic and Analysis Instrument
The Service Master Plus combines innovative technology with
increased overall capabilities to bring you a premier diagnostic
instrument. This tool is more than just a meter; it incorporates
data measurement, display, and on-screen analysis to provide
increased functionality that extends far beyond standard meters
currently on the market.
Capabilities:
•
Hand held diagnostic meter
•
Measure and Display
-
Pressure
-
Flow
-
Rotational Speed
-
Temperature
-
Auxiliary inputs
Features:
• 26
sensor inputs
•
Rugged design
•
Auto sensor recognition
•
CAN open sensors
•
Full color data display options
•
Fast scan rate
•
Store data to device, micro SD
or USB
•
SensoWin software utility
•
Scan rate of 1ms
Service Master Plus K-SCM-500-01-01-ENG Technical Data
Functions
CANbus Inputs
Ambient Operating Condition
s
Measurement Accuracy: ±0.25 % FS
2
CANbus networks with 8 inputs each
(16
total)
Ambient temperature: 32 to 112 F°
Temp Error: 0.02% FS per °C
Storage temperature: -10 to 140 F°
Display
Scanning Rate: 1 ms
Relative humidity: < 80 %
Visible Area: 115 x 86 mm
Input Impedance: 1 kO
Environmental test: IEC60068-2-32
(1
m, free fall)
Resolution 640 x 480 pixels
M12x1, 5 pin push-in connector
Interfaces
Analog Inputs
Type of Protection
USB device type B (mass storage)
6
Senso Control sensor inputs
IP64 (to EN60529) (Un-connected)
IP54 in connected state
USB host type A (PC Connection)
Parker Automatic Sensor Recognition
10/100
base T Ethernet RJ45
Scanning Rate: 1 ms
Power Supply
Functions
Input Impedance: 1 kO
Internal Lithium Ion pack, +7.4 VDC/4500 mAh
Measuring mode: Start/stop, points, trigger
5
pin push-pull connection
External 110/240 VAC - 24 VDC/2500 mA
Measurement: ACT, MIN and MAX
Digital Input /Output
Charge Time: 3h
Measurement display: Numerical, bar graph,
pointer, curve graph
Active High 7 to 24 VDC
Run time with fully charged battery: 8h
Active Low <1 VDC
Housing/protective sleeve
Trigger: Slope, manual, level, window, time,
logic, Pre-Trigger
Input Impedance: 1 kO
Housing material: ABS/PC (thermoplastic)
Output Current - 20 mA
Housing protective sleeve material: TPE
(
thermoplastic elastomer)
Remote operation via the Ethernet
Analog Inputs for auxiliary sensors
Acoustic notification at any incident
2
analog inputs for measuring current
and voltage
Dimensions (w x h x d):
257
mm x 75 mm x 181 mm
Measure value storage
6,000,000
points per measurement
Scanning Rate: 1ms
Weight: 3.4 lbs
1,000,000,000
points total storage
Voltage Measuring Range: -10 to +10VDC
On board storage 64 MB
Current Measuring Range: 0/4 to 20 mA
External: Micro SD memory card slot
Configurable as FAST-mode analog
inputs, 0.1ms scanning rate
External: USB mass storage device
Service Master Plus K-SCM-500-01-01-ENG includes:
The Parker Service Master Plus Instrument
Quick Start Manual
Power Supply
USB Connection Cable
SensoWin Software
Category 5 LAN Cable