B-5
60
Series double shut-off couplings are versatile for use across
a spectrum of hydraulic applications where fluid lines require
connection and disconnection. Couplers and nipples are
available in a wide range of sizes and materials.
Features:
•
Accepts ISO 7241-1, Series B compliant nipples
•
Poppet valves along with a metal to metal valve stop
maintains valve alignment and prevents flow checking
•
Steel, brass, and stainless steel material options
•
Brass couplers have double O-rings and stainless steel
locking balls
•
Steel coupler sleeve and steel nipple body are hardened to
be wear resistant
•
Standard end configurations include female pipe and straight
thread ORB
•
Optional Sleeve-Lok and alternative seal materials available
Applications include:
•
Industrial hydraulic lines
•
Food and chemical processing
•
Water and coolant lines
•
Mobile equipment
•
May be used with some gases
60
Series
ISO 7241, Series B
Manual sleeve, poppet valve
Hydraulic Quick Couplings
General Purpose
General Purpose Specifications
Industry Standard: Parker 60 Series couplings comply with ISO 7241 Series B Standard.
ANSI/ISO Pressure Rating: Dynamic applications with normal to
moderate hydraulic shocks such as general industrial equipment,
hydraulic presses, agricultural equipment, etc. Impulse tested at
a multiple (125% to 133%) of rated pressure.
Low Cycle, Non-pulsating Pressure Rating: Applications
with lower cycle life and no severe cyclic pressure
fluctuations, essentially steady pressure during an
operating cycle. Typical applications include hydraulic
jacks, mine roof support systems, and high pressure
fluid transfer (pumping water or slurry in oil wells).
Minor pump ripple is considered non-pulsating.
Impulse tested at rated pressure.
Body Size
1/8 1/4 3/8 1/2 3/4 1 1 1/2 2 1/2 1/8 1/4 3/8 1/2 3/4 1 1 1/2 2 1/2
Rated Pressure (psi)
Rated Pressure (psi)
Brass
1000 1000 1000 1000 1000 1000 800 800 3000 3700 2700 3500 2200 1500 1500 1200
Stainless
steel
2000 2000 1500 1500 1500 1000 1000 1000 5000 5000 5000 5000 3000 3000 1500 1500
Steel
5000 5000 4000 4000 2500 2000 1000 1000 5000 5000 4000 4000 2500 2000 1500 1500
Steel w/
HD nipple
N/A 5000 4000 4000 3000 3000 N/A N/A 5000 5000 4000 4000 3000 3000 N/A N/A
Seal Temperature Range:
Nitrile:
-40
°F to +250°F (Standard seal for Brass, Steel, & 303 Stainless Steel couplings).
Fluorocarbon:
-15
°F to +400°F (Standard seal for 316 Stainless Steel couplings).
Other Seal materials:
Contact the Division for availability.
Vacuum Data:
27.4
inches Hg (-0.9 Bar) both connected and disconnected. (1-1/2” and 2-1/2” body size 60 Series couplings are not recommended for service in
disconnected mode)
Body Size
1/8
1/4
3/8
1/2
3/4
1
1 1/2
2 1/2
Rated Flow (gpm)
.8
3
6
12
28
50
100
200
Parker Hannifin Corporation
Quick Coupling Division
Minneapolis, MN
www.parker.com/quickcouplings
B
Hydraulics