Goodyear Rubber Products
CALL
TOLL FREE
IN THE USA
1-866-711-4673
INTERNATIONAL SALES CALL
+1-727-342-5086
WE SHIP WORLDWIDE
International Sales Click Here
Get A
Quote
Now
Home
About Us
Product Brands
Catalogs
Contact Us
Locations
Corporate Headquarters,
Clearwater, Florida, (FL)
Parker Store, Bradenton, Florida, (FL)
Parker Store, St. Petersburg, (FL)
Parker Store, Ft. Myers, Florida, (FL)
Parker Store, Naples, Florida, (FL)
Parker Store, Tampa, Florida, (FL)
<< Previous Page
Click Here
to open this page in a new window.
Next Page >>
EquipmentAccessoriesFittingsTechnicalHose Series30 Catalog 4400 US 30 Series Fittings Assembly Instructions Use with 302 hose. 30 Series Hose Assembly Instructions 1. Identify over all length (OAL) of hose assembly and the cut off A allowance (COA) length of fitting(s) on hose ends by use of the fitting data table. Properly measure, mark and cut hose to desired length using fine tooth hacksaw or a cutoff machine. Dip hose end into Hoze-Oil (See Section C) or heavy oil. 2. Place socket in vice and screw in hose counter-clockwise until 1 hose bottoms. Back hose out 1/2 turn. 3. Dip hose end of nipple into Hoze-Oil or other heavy oil up to the hex. When assembling fittings of 316 stainless steel lubricate the threads of both the socket and nipple with Down B Corning Molykote G-n or equivalent metal assembly lubricant. 4. Screw nipple assembly into socket using wrench on nipple hex until nipple hex shoulders against socket. 2 Note: Disassemble in reverse order. C 3 D 4 E B-156 Hose Products Division Parker Hannifin Corporation Wickliffe, Ohio
Goodyear Rubber Products
