Goodyear Rubber Products
CALL
TOLL FREE
IN THE USA
1-866-711-4673
INTERNATIONAL SALES CALL
+1-727-342-5086
WE SHIP WORLDWIDE
International Sales Click Here
Get A
Quote
Now
Home
About Us
Product Brands
Catalogs
Contact Us
Locations
Corporate Headquarters,
Clearwater, Florida, (FL)
Parker Store, Bradenton, Florida, (FL)
Parker Store, St. Petersburg, (FL)
Parker Store, Ft. Myers, Florida, (FL)
Parker Store, Naples, Florida, (FL)
Parker Store, Tampa, Florida, (FL)
<< Previous Page
Click Here
to open this page in a new window.
Next Page >>
Truck(Fleet)PTFE &TechnicalHydraulic&ThermoplasticHose,AirCoiledAlphanumeric&ToolingHoseApprovals& ProductsHose& PneumaticTubingDesignFittingsIndexAccessoriesEquipmentGuides MiniKrimpTM FittingsFit.&HoseInformation&Accessories Crimping Machine Part #: 015307,Upright Vise Mount Machined and bent from � inch thick 1018 steel. The mount connects to the bottom of the MiniKrimpTM using four 3/8-16 bolts (bolts not included). Once connected, the MiniKrimpTM can then be clamped into a vise for operation. Top and side view shown. Part #: 015306, Table Mount Machined and bent from � inch thick 1018 steel. The mount connects to the bottom of the MiniKrimpTM using four 3/8-16 bolts (bolts not included). The MiniKrimpTM can then be mounted to a table using the four 3/8 inch clearance holes on the other side of the plate (bolts not included). Top and side view shown. Part #: 015309, High Pressure Hose Assembly Parker 10,000 psi, � inch ID hose with 3/8 inch female JIC connections on both ends. Hose is 6 feet long and is used when a flexible connection is required between the MiniKrimp and a hydraulic pressure source. Part #: 015308, Replacement Connector Replacement stainless steel bent tube rigid connector for 94C-001-PFD (MiniKrimp Hand Pump Model). Part #: 025349, Replacement Connector Replacement stainless steel bent tube rigid connector for 94C-002-PFD (MiniKrimp Air over Hydraulic Model). Part #: 045234, High Pressure Hose Assembly for stand Parker 10,000 psi � inch ID hose with quick coupler. This hose i s designed to be used when mounting a hand pump to the 94C-MKS MiniKr impTM stand's base. See picture below. Part #: 94C-MKS, Folding Stand The 94C-MKS is a lightweight folding stand designed exclusively for the MiniKrimpTM portable crimper (works with all versions). When not in use the stand folds up closely to the MiniKrimpTM for storage. Mounting hardware and safety instructions are included. See pictures below for configuration examples Patent pending Note: The hydraulic connectors shown above are designed exclusively for use with the MiniKrimp. No other connectors are approved for use with the MiniKrimp without expressed written consent from Parker Parflex Division's technical support. Any worn connectors should be replaced immediately. 220 Parker Hannifin Corporation Parflex Division Ravenna, Ohio
Goodyear Rubber Products
