Goodyear Rubber Products
CALL
TOLL FREE
IN THE USA
1-866-711-4673
INTERNATIONAL SALES CALL
+1-727-342-5086
WE SHIP WORLDWIDE
International Sales Click Here
Get A
Quote
Now
Home
About Us
Product Brands
Catalogs
Contact Us
Locations
Corporate Headquarters,
Clearwater, Florida, (FL)
Parker Store, Bradenton, Florida, (FL)
Parker Store, St. Petersburg, (FL)
Parker Store, Ft. Myers, Florida, (FL)
Parker Store, Naples, Florida, (FL)
Parker Store, Tampa, Florida, (FL)
<< Previous Page
Click Here
to open this page in a new window.
Next Page >>
Accessories Pneumatic Quick Couplings Blow Guns (Controlled Pressure) Features � Parker Controlled Pressure Blow Guns meet OSHA � Parker Controlled Pressure Blow Guns have a black epoxy requirements (section 29 CFR 1910.242 paragraph b), and coated zinc body and vented nozzles to prevent pressure directive #100-1. "Compressed air shall not be used for build-up when dead ending occurs up to 150 psi. cleaning purposes except where reduced to less than 30 psi, and then only with effective chip guarding and personal protective equipment." Description Specifications 410-S � Parker Controlled Part Maximum Wt. (LB) No. Pressure P/Piece Pressure Blow Guns features thumb lever valve 410-S 150 PSI. 0.50 actuator and brass nozzle. 410-SV 150 PSI 0.53 Inlet port is 1/4" NPT. 415-S 150 PSI 0.48 410-SV � Parker Venturi Nozzle Controlled Pressure Blow Gun with thumb lever valve and large venturi side ports for high volume flow. Inlet port is 1/4" NPT. 415-S � Parker Controlled Pressure Blow Guns features push button valve actuator and brass nozzle. Inlet port is 1/4" NPT. Part No. 400-S-TIP Blow Gun Replacement Tip Accessories Blow Guns (Full Pressure) The following Parker Blow Guns must have a pressure regulator setting below 30 psi to conform to OSHA safety requirements 29 CFR 1910.242 Paragraph b. Description Specifications 410 � Parker two way thumb Part Maximum Wt. (LB) lever valve has an zinc body No. Pressure P/Piece with 1/4" NPT inlet and 1/8" 410 150 PSI 0.48 NPSF outlet. 410-N 150 PSI 0.51 Note: Standard Gun without 415-N 150 PSI 0.49 nozzle. APneumatics 410-N � Parker thumb lever style Blow Gun features a zinc body, brass nozzle, and 1/4" NPT female inlet. 415-N � Parker Blow Gun features a push button style actuator, zinc body with a brass nozzle and 1/4" NPT female inlet. Quick Coupling Division 8145 Lewis Road � Minneapolis, MN 55427 A-43 www.parker.com/quickcouplings
Goodyear Rubber Products
