Home
About Us
Location Maps
Products
Full PDF Catalogs
Quote
Contact Us
<< Previous Page
Click Here
to open this page in a new window.
Next Page >>
Conveyor Products Beltline Maintenance Tools TM TM TM PT Max Belt Trainer V-Plow Flex-Lok Skirt Clamps Flex-Lifter The PT MaxTM is a high performance belt trainer. The V-Plow is a "belt cleaner" for the inside of the belt. Eliminating loading point spillage can be done effectively Moving a tensioned conveyor belt out of the way to do The patented "pivot & tilt" design delivers superior It keeps rocks, lumps, fines and other debris from getting and permanently with Flex-LokTM Skirt Clamps. These maintenance work is a tough job. And it can be dangerous training action that makes it easy to keep even the into the tail pulley and causing damage to the belt, splice, versatile skirt clamps feature an interlocking design that can if the right tools are not used. The Flex-Lifter is designed most troublesome belts on track permanently. When lagging or pulley. be installed and readjusted to lift tensioned belts easily a belt mistracks as little as 1/2" (13mm), the PT Max by a single person. When and safely. It is portable · Exclusive Blade Design the blade's 20º begins a pivoting action. This properly installed, the skirt and easy to place on the leading edge spirals debris off the belt. immediately triggers a tilting rubber will not rub on the conveyor. The Flex-Lifter action that increases the · Self-Adjusting Blade the plow is installed belt or cause premature wear can lift top side (both tension in the belt on the side so the blade floats on the belt and self- or gouge marks on the belt. troughed and flat belts) wandering off, and this uneven adjusts as it wears. Other features include: and return side belts. tension causes the belt to move Each model covers a · Unique Adjuster a turnbuckle-type · Unique Wedge Pin skirt rubber is inserted and adjusted back to center. Top side and range of belt widths. adjuster allows the blade to be fine- by simply using a non-metal hammer to unlock the self- return side models are available. "Pivot & Tilt" tuned to the belt at installation. This means the nose of contained wedge in the clamp pin and relocking it. Other features include: the plow is accurately positioned so it will not dig into · Anti-Vibration Clamp Pin the wedge in · Two Sensor Rollers on Each Side the increased belt the belt and cause damage to the belt or the plow. the clamp pin has one side serrated, Other Flexco Maintenance Tools edge surface contact reduces severe edge pressure and · UHMW Blade for long blade life and less wear and tear so when the wedge is pounded into ® Flexco 840 Belt Cutter eliminates belt edge damage. on the belt. Replacement blades are economical and easy the closed position the teeth lock it in Makes straight belt end cuts quickly and easily. Adjustable · Pivot Points Will Not Freeze Up eliminates a common to change out. place and guard against loosening due to clamp bars hold the belt securely and a double-edged problem with conventional trainers. A unique universal vibration. · Easy to Install comes fully assembled and can be placed blade cuts cleanly in either direction. bearing requires no lubrication and is guaranteed to last. right into position on the conveyor. Simple step-by-step · Low Maintenance all parts interlock for assembly. instructions are included for quick installation. No nuts and bolts to rust and break off. · Versatile fits any conveyor structure. An optional · Safe to Service all maintenance can be done safely Clamp Plate Kit is available for mounting on small from the sides of the conveyor. PT Max channel, rope or tube structures. Can be used at the Top Side · Versatile can be used with a range of skirt rubber TM tail pulley or anywhere on the beltline where carryback FSK Belt Skiver thicknesses from 5/16" to 1" (8 to 25mm). is a problem. It simplifies the process of recessing fasteners by accurately and uniformly skiving the belt's top cover. Increases Mini Flex-Lok Skirt Clamps belt fastener/cleaner compatibility. Mini Flex-Lok has been reduced in height to accommodate tight PT Max chute configurations and portable ® ® Return Side Far-Pul HD Belt Clamps equipment with restricted space. Easy-to-use, adjustable belt clamps. Engineered for heavy- Height of the mini clamp plate duty applications and adjustable to a variety of belt widths. Standard Mini No Risk Performance Guarantee is 4-1/2" (113mm); the standard clamp plate is 7" (175mm). Mini Flex-Lok will handle a skirt Our PT MaxTM Belt Trainer Center Bearing is rubber thickness range from 5/16" to 5/8" (8 to 16mm). guaranteed for 5 years of satisfactory service. It will not freeze up, seize up or wear out. Stainless Steel Flex-Lok Skirt Clamps If there are any problems Optional Urethane Blade Kits Flexco will replace it without charge. For extended blade wear life, urethane blade kits The standard model Flex-Lok is available in 316 stainless are available. steel for corrosive applications.
