Parker Hannifin Corporation
Tube Fittings Division
Columbus, Ohio
http://www.parker.com/tfd
R9
4300
Catalog
Equipment
Dimensions and pressures for reference only, subject to change.
Fig. R12 — 424 Bender
Fig. R13 — Slide Block
Exactol
®
Model 412 Kit
This 412 kit contains all the basic tool requirements for bending
tube from 1/4” through 3/4”.
Part No.
412
KIT
The following part numbers are included in the kit:
Part Name
Part No.
Exactol Model 412 Bender..........................................................
560569
Carrying Case.............................................................................
550572
Slide Block for 1/4” through 3/4” tube..........................................
550585
Radius Block – 1/4” O.D. tube ....................................................
550579
Radius Block – 3/8” O.D. tube.....................................................
550581
Radius Block – 1/2” O.D. tube.....................................................
550582
Radius Block – 5/8” O.D. tube.....................................................
550583
Radius Block – 3/4” O.D. tube.....................................................
550584
Exactol
®
Model 424
The Exactol Model 424 will bend tube from size 4 (1/4” O.D.)
through size 24 (1 1/2”O.D.) and 6mm through 38mm inclusive.
See pageR7 for wall thickness capabilities.It is completely por-
table andmay be vise or benchmounted.Bulletin 4391-B400S
and video are included with the bender, which describe the
operation in detail.
NOTE:
The 424 must be bench mounted if mandrels are
used.
A video (on DVD) is included to provide proper instructions
for use.
COMPONENTS REQUIRED
The minimum components required are a Model 424 Bender
with a slide block and a radius block that match the tube O.D.
to be bent.
Part Name
Part No.
Exactol Model 424 bender (for 1/4” through 1 1/2” O.D.). ...........
621044
Slide Block (for sizes 4-5-6-8-10-12)...........................................
550585
Slide Block (for sizes 14-16-18-20).............................................
621045
Slide Block (for size 24). .............................................................
870150
Slide Block (for sizes 6mm-8mm-10mm-12mm-14mm)..............
820091
Slide Block (for sizes 15mm-16mm-18mm-20mm).....................
820092
Slide Block (for sizes 22mm-25mm-28mm-30mm).....................
820093
Slide Block (for size 35mm). .......................................................
820094
Slide Block (for size 38mm). .......................................................
870150
Radius Blocks (for sizes -4 thru -24 and 6mm thru 38mm)......... See
pages R10
– R11
OPTIONAL ACCESSORIES
Bench Mounting Adapter. ...........................................................
631156
Mandrel Bending Components
for 412 and 424 Benders......................................................... See
pages R16
– R18
Fig. R11 — 412 Kit
Benders
link