Goodyear Rubber Products
CALL
TOLL FREE
IN THE USA
1-866-711-4673
INTERNATIONAL SALES CALL
+1-727-342-5086
WE SHIP WORLDWIDE
International Sales Click Here
Get A
Quote
Now
Home
About Us
Product Brands
Catalogs
Contact Us
Locations
Corporate Headquarters,
Clearwater, Florida, (FL)
Parker Store, Bradenton, Florida, (FL)
Parker Store, St. Petersburg, (FL)
Parker Store, Ft. Myers, Florida, (FL)
Parker Store, Naples, Florida, (FL)
Parker Store, Tampa, Florida, (FL)
<< Previous Page
Click Here
to open this page in a new window.
Next Page >>
SQ-Swage Instructions CONTINUED FROM PAGE 239 SEWERHOSE 5 INSPECT 6 ASSEMBLE 7 ASSEMBLE FITTINGS HOSE HOSE Verifyfitting part number match- Mark each hose end with proper Mark hose at bottom of fitting es work order. insertion depth line as follows: shell. (Mark indicates the full length in which hose will be in- Visually inspectfittingforproper- Place fitting next to hose and serted into fitting.) ly crimped shells,internalbarbs, align annular crosshatched ring a through-hole and damage. on fitting with end of hose. 8 ASSEMBLE 9 ASSEMBLE 10 ASSEMBLE HOSE HOSE HOSE Repeat Steps 4a and 4b for other Using Parker Hoze-Oil or an SAE Push each hose end into fitting hose. 20lubricatingoil,lightlylubricate all the way to depth insertion inside of both hose ends. mark. NOTE The following steps are per- CoiledAirHose,PTFE&Hydraulic&Technical formed using the PSH-Swager. (Fleet)TruckTooling&FittingsPneumaticThermoplasticHose&DesignApprovals&AlphanumericHose ProductsEquipmentAccessories&FittingsFit.&HoseTubingInformationGuidesIndexAccessories NOTE You must use 2 complete dies for each size. CAUTION Make sure both die halves are the same size and their serial numbers match. Failure to do so will result in an improperly crimped fitting. 251 Parker Hannifin Corporation Parflex Division Ravenna, Ohio
Goodyear Rubber Products
