Gas Hose
Javascript DHTML Drop Down Menu Powered by dhtml-menu-builder.com
|
LP Gas Hose
UL21, CGA Type I
Series 7132
Series 7132 is a flexible, lightweight liquefied petroleum gas (LPG)/propane delivery and transfer hose. The hose meets all Underwriters Laboratories (UL21) and Canadian Gas Association (CGA Type I) requirements. The construction incorporates multiple textile plies of reinforcement for flexibility and kink resistance. The perforated cover is resistant to mild chemicals, oil and ozone. Series 7132 is available in long lengths on reels, long cut lengths and factory-tested assemblies from stock in popular configurations.
Series 7132 and DOT:LPG hose assemblies installed on on-road vehicles must meet Department of Transportation (DOT) requirements. Factory assemblies (3/4" and larger) are pressure tested, one of the fittings is etched with a unique DOT certification number, and a document incorporating the identical certification number accompanies each assembly. Metal DOT identification bands are also available/attached for an additional charge at customer request.
Series 7132 and Natural Gas: The molecules of natural gas are small, enhancing their ability to permeate through standard rubber hose constructions. The permeation process is more rapid as the working pressure increases, and natural gas accumulates with potentially dangerous consequences. Series 7132 may be used for natural gas service, but ONLY under.
ALL of the following conditions:
-
The application must be in a well-ventilated environment: Outdoors, or indoors with significant continuous air movement.
-
Series 7132 is not to replace fixed/rigid pipe where that material is more appropriate due to reduced permeation and overall strength and durability. Use rigid pipe, non-permeable tubing or hose with barrier constructions to convey natural gas whenever possible.
Series 7132 and Compressed Natural Gas (CNG): Series 7132 is not for use in any CNG application, including fuel dispensing, on-board vehicle fuel lines, or fuel transfer. Series 7132 and Anhydrous Ammonia (NH3): Series 7132 is not for use with anhydrous ammonia.
Tube: Black nitrile
Reinforcement:Multiple textile plies
Cover:Black chloroprene; perforated smooth finish
Temp. Range: -40°F to +180°F (-40°C to +82°C) (The hose construction is capable of this rating, but LP Gas should NEVER be conveyed over 140°F/60°C)
Brand Method: Impression
Brand Example: PARKER SERIES 7132 (ID) CSA® CAN 1-8.1 CGA TYPE I CAUTION – LP GAS HOSE MH6737 C U ® US ISSUE NO. XXXXXX 350 PSI MAX WP MADE IN USA (DATE CODE)
Design Factor: 5:1
Industry Standards: UL21; CAN/CGA–8.1–M86 Type I; optional DOT factory hose assembly testing and marking also available for sizes smaller than 3/4". Contact Parker.
Applications:
- LP gas/propane
- Cookers, grills, heaters, weed burners; delivery, transfer
- Agriculture, commercial and residential heating, construction, general industrial
Vacuum: Not recommended
Compare to: Boston Blackline (LPG); Gates LP350; Thermoid Type 75
Packaging: Cartons, coils, reels (“E” suffix in part number indicates UPS-shippable reel under 80 pounds)
|
 |
Part Number |
ID (in) |
ID (mm) |
Reinf Plies |
OD(in) |
OD (mm) |
Approx Wt (lbs/ft) |
Approx Wt (kg/ft) |
Min Bend Rad (in) |
Min Bend Rad(mm) |
Max Rec WP (psi) |
Max Rec WP (bar) |
Perm Cplg Rec * |
Std Pack Qty (ft) |
Stock Status ** |
7132-19352 |
3/16 |
4.8 |
2 |
0.510 |
13.0 |
0.11 |
0.05 |
2.0 |
50.8 |
350 |
24.1 |
* |
800 |
N |
7132-25354 |
1/4 |
6.4 |
4 |
0.610 |
15.5 |
0.15 |
0.07 |
2.5 |
63.5 |
350 |
24.1 |
7661 |
750 |
Y |
7132-25354E |
1/4 |
6.4 |
4 |
0.610 |
15.5 |
0.15 |
0.07 |
2.5 |
63.5 |
350 |
24.1 |
7661 |
350 |
Y |
7132-38354 |
3/8 |
9.5 |
4 |
0.760 |
19.1 |
0.22 |
0.10 |
3.5 |
88.9 |
350 |
24.1 |
HY |
600 |
Y |
7132-38354E |
3/8 |
9.5 |
4 |
0.760 |
19.1 |
0.22 |
0.10 |
3.5 |
88.9 |
350 |
24.1 |
HY |
300 |
Y |
7132-50354 |
1/2 |
12.7 |
4 |
0.937 |
23.8 |
0.32 |
0.15 |
4.5 |
114.3 |
350 |
24.1 |
7661 |
500 |
Y |
7132-75354 |
3/4 |
19.1 |
4 |
1.250 |
31.8 |
0.50 |
0.23 |
6.5 |
165.1 |
350 |
24.1 |
HY |
350 |
Y |
7132-75354100 |
3/4 |
19.1 |
4 |
1.250 |
31.8 |
0.50 |
0.23 |
6.5 |
165.1 |
350 |
24.1 |
HY |
2 x 100 |
Y |
7132-75354125 |
3/4 |
19.1 |
4 |
1.250 |
31.8 |
0.50 |
0.23 |
6.5 |
165.1 |
350 |
24.1 |
HY |
1 x 125 |
Y |
7132-75354150 |
3/4 |
19.1 |
4 |
1.250 |
31.8 |
0.50 |
0.23 |
6.5 |
165.1 |
350 |
24.1 |
HY |
1 x 150 |
Y |
7132-75354200 |
3/4 |
19.1 |
4 |
1.250 |
31.8 |
0.50 |
0.23 |
6.5 |
165.1 |
350 |
24.1 |
HY |
1 x 200 |
Y |
7132-100354 |
1 |
25.4 |
4 |
1.500 |
38.1 |
0.63 |
0.29 |
7.5 |
190.5 |
350 |
24.1 |
7661 |
300 |
Y |
7132-100354100 |
1 |
25.4 |
4 |
1.500 |
38.1 |
0.63 |
0.29 |
7.5 |
190.5 |
350 |
24.1 |
7661 |
100 |
Y |
7132-100354125 |
1 |
25.4 |
4 |
1.500 |
38.1 |
0.63 |
0.29 |
7.5 |
190.5 |
350 |
24.1 |
7661 |
1 x 125 |
Y |
7132-100354150 |
1 |
25.4 |
4 |
1.500 |
38.1 |
0.63 |
0.29 |
7.5 |
190.5 |
350 |
24.1 |
7661 |
1 x 150 |
Y |
7132-100354200 |
1 |
25.4 |
4 |
1.500 |
38.1 |
0.63 |
0.29 |
7.5 |
190.5 |
350 |
24.1 |
7661 |
200 |
Y |
|
LP Gas Hose –1 Factory Assemblies
UL21 / CGA Type I
Series 7132
Crimped-on Carbon Steel Couplings, Rigid Male NPT Thread x Rigid Male NPT Thread Cartons
Factory assemblies (3/4” and larger) are Department of Transportation (DOT) pressure-tested, one of the fittings is etched with a unique DOT certification number, and a document incorporating the identical certification number accompanies each assembly. Metal DOT identification bands are also available/attached at an additional charge per customer request.
Part Number |
ID (in) |
ID (mm) |
Length (ft) |
Length (mtrs) |
Approx Wt (lbs/ea) |
Approx Wt (kg/ea) |
Std Pack Qty (ea) |
Stock Status ** |
7132TY08MP-72 |
1/2 |
12.7 |
6 |
1.83 |
2.53 |
1.15 |
1 |
Y |
7132TY08MP-96 |
1/2 |
12.7 |
8 |
2.44 |
3.17 |
1.44 |
10 |
Y |
7132TY08MP-120 |
1/2 |
12.7 |
10 |
3.05 |
3.82 |
1.73 |
10 |
Y |
7132TY08MP-144 |
1/2 |
12.7 |
12 |
3.66 |
4.46 |
2.02 |
10 |
Y |
7132TY08MP-180 |
1/2 |
12.7 |
15 |
4.57 |
5.42 |
2.46 |
10 |
Y |
7132TY08MP-216 |
1/2 |
12.7 |
18 |
5.49 |
6.39 |
2.90 |
10 |
Y |
7132TY08MP-240 |
1/2 |
12.7 |
20 |
6.10 |
7.03 |
3.19 |
10 |
Y |
7132TY08MP-300 |
1/2 |
12.7 |
25 |
7.62 |
8.64 |
3.92 |
10 |
Y |
7132TY08MP-600 |
1/2 |
12.7 |
50 |
15.24 |
16.68 |
7.57 |
10 |
Y |
7132TY08MP-1200 |
1/2 |
12.7 |
100 |
30.48 |
32.75 |
14.86 |
1 |
Y |
7132HY12MP-12 |
3/4 |
19.1 |
1 |
0.30 |
1.31 |
0.59 |
1 |
Y |
7132HY12MP-36 |
3/4 |
19.1 |
3 |
0.91 |
2.34 |
1.06 |
8 |
Y |
7132HY12MP-120 |
3/4 |
19.1 |
10 |
3.05 |
5.92 |
2.69 |
8 |
Y |
7132HY12MP-144 |
3/4 |
19.1 |
12 |
3.66 |
6.95 |
3.15 |
10 |
Y |
7132HY12MP-180 |
3/4 |
19.1 |
15 |
4.57 |
8.48 |
3.85 |
10 |
Y |
7132HY12MP-216 |
3/4 |
19.1 |
18 |
5.49 |
10.02 |
4.55 |
1 |
Y |
7132HY12MP-300 |
3/4 |
19.1 |
25 |
7.62 |
13.61 |
6.17 |
1 |
Y |
7132HY12MP-1200 |
3/4 |
19.1 |
100 |
30.48 |
52.03 |
23.60 |
1 |
N |
7132HY12MP-1500 |
3/4 |
19.1 |
125 |
38.10 |
64.84 |
29.41 |
1 |
N |
7132HY12MP-1800 |
3/4 |
19.1 |
150 |
45.70 |
77.65 |
35.22 |
1 |
Y |
7132LAR16MP-1200 |
1 |
25.4 |
100 |
30.48 |
65.06 |
29.51 |
1 |
Y |
7132LAR16MP-1500 |
1 |
25.4 |
125 |
38.10 |
80.98 |
36.73 |
1 |
Y |
7132LAR16MP-1800 |
1 |
25.4 |
150 |
45.70 |
96.90 |
43.95 |
1 |
Y |
7132LAR16MP-2100 |
1 |
25.4 |
175 |
53.34 |
112.81 |
51.17 |
1 |
N |
|
|
|
|
|
|
|
|
|
|
 |
X-TREME™
Low Temperature LP Gas Hose
UL21, CGA Type I
Series 7132XTC
Series 7132XTC is a flexible, lightweight, low temperature liquefied petroleum gas (LPG)/propane delivery and transfer hose. The hose meets all Underwriters Laboratories (UL21) and Canadian Gas Association (CGA Type I) requirements. The construction stays flexible to -65°F (-53°C) and incorporates multiple textile plies of reinforcement for flexibility and kink resistance. The perforated cover is resistant to mild chemicals, oil and ozone. Series 7132XTC is available in long lengths on reels, long cut lengths and factory-tested assemblies from stock in popular configurations.
Series 7132XTC and DOT: LPG hose assemblies installed on on-road vehicles must meet Department of Transportation (DOT) requirements. Factory assemblies (3/4" and larger) are pressure tested, one of the fittings is etched with a unique DOT certification number, and a document incorporating the identical certification number accompanies each shipment. Metal DOT identification bands are also attached at an additional charge per customer request.
Series 7132XTC and Natural Gas: The molecules of natural gas are small, enhancing their ability to permeate through standard rubber hose constructions. The permeation process is more rapid as the working pressure increases, and natural gas accumulates with potentially dangerous consequences. Series 7132XTC may be used for natural gas service, but ONLY under
ALL of the following conditions:
- The application must be in a well-ventilated environment: Outdoors, or indoors with significant continuous air movement.
-
Series 7132XTC is not to replace fixed/rigid pipe where that material is more appropriate due to reduced permeation and overall strength and durability. Use rigid pipe, non-permeable tubing or hose with barrier constructions to convey natural gas whenever possible.
Series 7132XTC and Compressed Natural Gas (CNG): Series 7132XTC is not for use in any CNG application, including fuel dispensing, on-board vehicle fuel lines, or fuel transfer. Series 7132XTC and Anhydrous Ammonia (NH3): Series 7132XTC is not for use with anhydrous ammonia.
Tube:Black nitrile
Reinforcement: Multiple textile plies
Cover: Black chloroprene; perforated smooth finish
Temp. Range:-65°F to +180°F (-53°C to +82°C) (The hose construction is capable of this rating, but LP Gas should NEVER be conveyed over 140°F/60°C)
Brand Method:Impression
Brand Example:PARKER SERIES 7132XTC X-TREME CGA TYPE I CAUTION – LP GAS HOSE (–65°F) MH6737 C U ® US ISSUE NO. XXXXX 350 PSI MAX WP MADE IN USA B2 (DATE CODE)
Design Factor:5:1
Industry Standards: UL21; CAN/CGA–8.1–M86 Type I; optional DOT factory hose assembly testing
and marking also available for sizes smaller than 3/4”. Contact Parker.
Applications:
- LP gas/propane
- Low temperature delivery, transfer
- Agriculture, commercial and residential heating, construction, general industrial
Vacuum:Not recommended
Compare to:Thermoid Polarflex
Packaging: Cartons, coils, reels
Part Number |
ID (in) |
ID (mm) |
Reinf Plies |
OD(in) |
OD (mm) |
Approx Wt (lbs/ft) |
Approx Wt (kg/ft) |
Min Bend Rad (in) |
Min Bend Rad(mm) |
Max Rec WP (psi) |
Max Rec WP (bar) |
Perm Cplg Rec * |
Std Pack Qty (ft) |
Stock Status ** |
7132XTC-25354 |
1/4 |
6.4 |
4 |
0.610 |
15.5 |
0.14 |
0.06 |
2.5 |
63.5 |
350 |
24.1 |
7661 |
750 |
Y |
7132XTC-38354 |
3/8 |
9.5 |
4 |
0.760 |
19.3 |
0.21 |
0.10 |
3.5 |
88.9 |
350 |
24.1 |
HY |
650 |
N |
7132XTC-50354 |
1/2 |
12.7 |
4 |
0.937 |
23.8 |
0.30 |
0.14 |
4.5 |
114.3 |
350 |
24.1 |
7661 |
500 |
N |
7132XTC-75354 |
3/4 |
19.1 |
4 |
1.250 |
31.8 |
0.48 |
0.22 |
6.5 |
165.1 |
350 |
24.1 |
HY |
350 |
Y |
7132XTC-1000 |
1 |
25.4 |
4 |
1.500 |
38.1 |
0.63 |
0.29 |
7.5 |
190.5 |
350 |
24.1 |
7661 |
250 |
Y |
7132XTC-1000100 |
1 |
25.4 |
4 |
1.500 |
38.1 |
0.63 |
0.29 |
7.5 |
190.5 |
350 |
24.1 |
7661 |
1 x 100 |
Y |
7132XTC-1000125 |
1 |
25.4 |
4 |
1.500 |
38.1 |
0.63 |
0.29 |
7.5 |
190.5 |
350 |
24.1 |
7661 |
1 x 125 |
Y |
7132XTC-1000150 |
1 |
25.4 |
4 |
1.500 |
38.1 |
0.63 |
0.29 |
7.5 |
190.5 |
350 |
24.1 |
7661 |
1 x 150 |
Y |
* Couplings: Refer to CrimpSource at www.safehose.com for coupling recommendations and crimp specifications.
** Stock: “Y” indicates stocked item; “N” indicates non-stocked item. Stock status subject to change. Contact Parker Customer Service.
|
 |
LP Gas Hose – Factory Assemblies
UL21 / CGA Type I – Low Temperature
Series 7132XTC
Crimped-on Carbon Steel Couplings, Rigid Male NPT Thread x Rigid Male NPT Thread Cartons
Factory assemblies (3/4" and larger) are Department of Transportation (DOT) pressure-tested, one of the fittings is etched with a unique DOT certification number, and a document incorporating the identical certification number accompanies each assembly. Metal DOT identification bands are also available/attached at an additional charge per customer request. Contact Parker.
Part Number |
ID (in) |
ID (mm) |
Length (ft) |
length (mtrs) |
Approx Wt (lbs/ea) |
Approx Wt (kg/ea) |
Std Pack Qty (ea) |
Stock Status ** |
7132XTCLAR16MP-1200 |
1 |
25.4 |
100 |
30.48 |
61.65 |
27.96 |
1 |
Y |
7132XTCLAR16MP-1500 |
1 |
25.4 |
125 |
38.10 |
76.71 |
34.80 |
1 |
Y |
7132XTCLAR16MP-1800 |
1 |
25.4 |
150 |
45.70 |
91.78 |
41.63 |
1 |
Y |
|
 |
LP Gas Hose
UL21, CGA Type I
Series 7232
Series 7232 is a large diameter, flexible liquefied petroleum gas (LPG)/propane transfer hose for large volume bulk loading/unloading and vibration-resistant onboard vehicle connections. The hose meets all Underwriters Laboratories (UL21) and Canadian Gas Association (CGA Type I) requirements. The construction incorporates multiple braids of textile reinforcement for kink resistance and superior coupling retention. The perforated cover is resistant to mild chemicals, oil and ozone. Series 7232 is available in long lengths and factory-tested assemblies in popular configurations.
Series 7232 and DOT: LPG hose assemblies installed on on-road vehicles must meet Department of Transportation (DOT) requirements. Factory assemblies (all sizes) are pressure tested, one of the fittings is etched with a unique DOT certification number, and a document incorporating the identical certification number accompanies each assembly. Metal DOT identification bands are also available/attached for an additional charge at customer request. Contact Parker.
Series 7232 and Natural Gas:The molecules of natural gas are small, enhancing their ability to permeate through standard rubber hose constructions. The permeation process is more rapid as the working pressure increases, and natural gas accumulates with potentially dangerous consequences. Series 7232 may be used for natural gas service, but ONLY under ALL of the following conditions:
- The application must be in a well-ventilated environment: Outdoors, or indoors with significant continuous air movement.
- Series 7232 is not to replace fixed/rigid pipe where that material is more appropriate due to reduced permeation and overall strength and durability. Use rigid pipe, non-permeable tubing or hose with barrier constructions to convey natural gas whenever possible.
Series 7232 and Compressed Natural Gas (CNG): Series 7232 is not to be used for any CNG application, including fuel dispensing, on-board vehicle fuel lines, or fuel transfer. Series 7232 and Anhydrous Ammonia (NH3): Series 7232 is not for use with anhydrous ammonia.
Tube: Black nitrile
Reinforcement:Multiple textile braids
Cover: Black chloroprene; perforated wrapped finish
Temp. Range:-40°F to +180°F (-40°C to +82°C) (The hose construction is capable of this rating, but LP Gas should NEVER be conveyed over 140°F/60°C)
Brand Method:
Side one:Embossed
Side two:Black text on yellow stripe
Brand Example: Side one (Embossed):PARKER SERIES 7232 CGA TYPE I CAUTION – LP GAS HOSE MH6737 C UR ® US ISSUE NO. XXXX 350 PSI MAX WP MADE IN USA (DATE CODE)
Side two (Stripe): PARKER LP GAS HOSE
Design Factor:5:1
Industry Standards: UL21; CAN/CGA–8.1–M86 Type I; optional DOT factory hose assembly testing and marking available. Contact Parker.
Applications:
- LP gas/propane
- Bulk loading/unloading, in-plant tank transfer, transport
- Agriculture, commercial and residential heating, construction, general industrial
Vacuum:Not recommended
Compare to:Boston Blackline (LPG); Gates LP350; Thermoid Type 65
Packaging: Cartons, reels
Part Number |
ID (in) |
ID (mm) |
Reinf Plies |
OD(in) |
OD (mm) |
Approx Wt (lbs/ft) |
Approx Wt (kg/ft) |
Min Bend Rad (in) |
Min Bend Rad(mm) |
Max Rec WP (psi) |
Max Rec WP (bar) |
Perm Cplg Rec * |
Std Pack Qty (ft) |
Stock Status ** |
7232-1252 |
1-1/4 |
31.8 |
2 |
1.815 |
46.1 |
0.85 |
0.39 |
12.0 |
304.8 |
350 |
24.1 |
HY |
300 |
Y |
7232-1252100 |
1-1/4 |
31.8 |
2 |
1.815 |
46.1 |
0.85 |
0.39 |
12.0 |
304.8 |
350 |
24.1 |
HY |
100 |
Y |
7232-1503K |
1-1/2 |
38.1 |
2 |
2.156 |
54.8 |
1.12 |
0.51 |
14.0 |
355.6 |
350 |
24.1 |
43 |
150 |
Y |
7232-2003K |
2 |
50.8 |
3 |
2.750 |
69.9 |
1.90 |
0.90 |
16.0 |
406.4 |
350 |
24.1 |
7661 |
150 |
Y |
|
 |
LP Gas Hose – Factory Assemblies
UL21 / CGA Type I
Series 7232
Crimped-on Carbon Steel Couplings, Rigid Male NPT Thread x Rigid Male NPT Thread Cartons
Factory assemblies (all sizes) are Department of Transportation (DOT) pressure-tested, one of the fittings is etched with a unique DOT certification number, and a document incorporating the identical certification number accompanies each assembly. Metal DOT identification bands are also available/attached at an additional charge per customer request. Contact Parker.
Part Number |
ID (in) |
ID (mm) |
Length (ft) |
length (mtrs) |
Approx Wt (lbs/ea) |
Approx Wt (kg/ea) |
Std Pack Qty (ea) |
Stock Status ** |
7232HY20MP-180 |
1-1/4 |
31.8 |
15 |
4.57 |
14.95 |
6.78 |
1 |
Y |
7232LA32NP-144 |
2 |
50.8 |
12 |
3.66 |
27.84 |
12.63 |
1 |
Y |
7232LA32NP-180 |
2 |
50.8 |
15 |
4.57 |
33.15 |
15.04 |
1 |
Y |
7232LA32NP-228 |
2 |
50.8 |
19 |
5.79 |
40.23 |
18.25 |
1 |
Y |
|
 |
LP Gas Hose
Stainless Steel Reinforced
UL21, CGA Type I
Series 7231
Series 7231 is a large diameter, extremely durable liquefied petroleum gas (LPG)/propane transfer hose for bulk loading/unloading and vibration-resistant onboard vehicle connections. The hose meets all Underwriters Laboratories (UL21) requirements and Canadian Gas Association (CGA Type I) requirements. The construction incorporates high tensile corrosion resistant stainless steel braided reinforcement for superior strength, durability and kink resistance. The perforated cover is resistant to mild chemicals, oil and ozone. Series 7231 is available in long lengths and factory-tested assemblies in popular configurations.
Series 7231 and DOT: LPG hose assemblies installed on on-road vehicles must meet Department of Transportation (DOT) requirements. Factory assemblies (all sizes) are pressure tested, one of the fittings is etched with a unique DOT certification number, and a document incorporating the identical certification number accompanies each assembly. Metal DOT identification bands are also available/attached for an additional charge at customer request. Contact Parker.
Series 7231 and Natural Gas: The molecules of natural gas are small, enhancing their ability to permeate through standard rubber hose constructions. The permeation process is more rapid as the working pressure increases, and natural gas accumulates with potentially dangerous consequences. Series 7231 may be used for natural gas service, but ONLY under ALL of the following conditions:
- The application must be in a well-ventilated environment: Outdoors, or indoors with significant continuous air movement.
- Series 7231 is not to replace fixed/rigid pipe where that material is more appropriate due to reduced permeation and overall strength and durability. Use rigid pipe, non-permeable tubing or hose with barrier constructions to convey natural gas whenever possible.
Series 7231 and Compressed Natural Gas (CNG): Series 7231 is not to be used for any CNG application, including fuel dispensing, on-board vehicle fuel lines, or fuel transfer. Series 7231 and Anhydrous Ammonia (NH3): Series 7231 is not for use with anhydrous ammonia.
Tube: Black nitrile
Reinforcement: One or multiple stainless steel braids
Cover: Black chloroprene; perforated wrapped finish
Temp. Range: -40°F to +180°F (-40°C to +82°C) (The hose construction is capable of this rating, but LP Gas should NEVER be conveyed over 140°F/60°C)
Brand Method: Black text on blue stripe
Brand Example: PARKER SERIES 7231 CGA TYPE I CAUTION – LP GAS HOSE MH6737 C U ® US ISSUE NO.XXXX 350 PSI MAX WP MADE IN USA (DATE CODE)
Design Factor: 5:1
Industry Standards:UL21; CAN/CGA–8.1–M86 Type I; optional DOT factory hose assembly testing and marking available. Contact Parker.
Applications:
- LP gas/propane
- Bulk loading/unloading; in-plant tank transfer
- Petrochemical refineries
Vacuum:Not recommended
Packaging: Cartons
Part Number |
ID (in) |
ID (mm) |
Reinf Plies |
OD(in) |
OD (mm) |
Approx Wt (lbs/ft) |
Approx Wt (kg/ft) |
Min Bend Rad (in) |
Min Bend Rad(mm) |
Max Rec WP (psi) |
Max Rec WP (bar) |
Perm Cplg Rec * |
Std Pack Qty (ft) |
Stock Status ** |
7231-1001 |
1 |
25.4 |
1 |
1.500 |
38.1 |
0.77 |
0.35 |
12.0 |
304.8 |
350 |
24.1 |
43 |
200 |
Y |
7231-1251 |
1-1/4 |
31.8 |
1 |
1.750 |
44.5 |
0.97 |
0.44 |
16.5 |
419.1 |
350 |
24.1 |
43 |
100 |
Y |
7231-1501K |
1-1/2 |
38.1 |
1 |
2.000 |
50.8 |
1.12 |
0.51 |
20.0 |
508.0 |
350 |
24.1 |
43, 71 |
150 |
Y |
7231-2002K |
2 |
50.8 |
2 |
2.625 |
66.7 |
1.87 |
0.85 |
25.5 |
635.0 |
350 |
24.1 |
WC, 43, 71, 7661 |
150 |
Y |
|
 |
LP Gas Hose
Static Wire
ISO 2928-1986 (E)
Series SS106
Series SS106 is a large diameter, heavy duty liquefied petroleum gas (LPG)/propane transfer hose for large volume bulk loading/unloading. The hose construction incorporates multiple plies of textile reinforcement for flexibility and kink resistance, and the perforated cover is resistant to abrasion, oil and ozone. The hose meets ISO 2928-1986 (E) requirements.
NOTES:
- Not for applications requiring Underwriters Laboratories (UL) or Canadian Gas Association (CGA) performance or listing.
- Refer to the Safety and Technical section of this catalog for safety, handling and use information.
Series SS106 and Natural Gas: The molecules of natural gas are small, enhancing their ability to permeate through standard rubber hose constructions. The permeation process is more rapid as the working pressure increases, and natural gas accumulates with potentially dangerous consequences.
Series SS106 may be used for natural gas service, but ONLY under ALL of the following conditions:
- The application must be in a well-ventilated environment: Outdoors, or indoors with significant continuous air movement.
-
Series SS106 is not to replace fixed/rigid pipe where that material is more appropriate due to reduced permeation and overall strength and durability. Use rigid pipe, nonpermeable tubing or hose with barrier constructions to convey natural gas whenever possible.
Series SS106 and Compressed Natural Gas (CNG): Series SS106 is not to be used for any CNG application, including fuel dispensing, on-board vehicle fuel lines, or fuel transfer. Series SS106 and Anhydrous Ammonia (NH3): Series SS106 is not for use with anhydrous ammonia.
Tube: Black nitrile
Reinforcement: Multiple textile plies with static wire
Cover: Black nitrile; perforated wrapped finish
Temp. Range:-40°F to +180°F (-40°C to +82°C) (The hose construction is capable of this rating, but LP Gas should NEVER be conveyed over 140°F/60°C)
Brand Method:Embossed
Brand Example:PARKER SERIES SS106 (ID) LPG HOSE ISO 2928-1986 (E) 20 BAR 350 PSI WP (DATE CODE) MADE IN USA
Design Factor:5:1
Industry Standards: ISO 2928-1986 (E)
Applications:
- LP gas/propane
- Bulk loading/unloading; in-plant tank transfer
Vacuum: Not recommended
Packaging:Coils
Part Number |
ID (in) |
ID (mm) |
Reinf Plies |
OD(in) |
OD (mm) |
Approx Wt (lbs/ft) |
Approx Wt (kg/ft) |
Max Rec WP (psi) |
Max Rec WP (bar) |
Perm Cplg Rec * |
Std Pack Qty (ft) |
Stock Status ** |
SS106-1250 |
1-1/4 |
31.8 |
4 |
1.990 |
50.6 |
0.82 |
0.37 |
350 |
24.1 |
* |
100 |
N |
SS106-1500 |
1-1/2 |
38.1 |
4 |
2.240 |
56.9 |
0.98 |
0.44 |
350 |
24.1 |
* |
100 |
N |
SS106-2000 |
2 |
50.8 |
4 |
2.740 |
69.6 |
1.31 |
0.59 |
350 |
24.1 |
* |
100 |
Y |
SS106-2500 |
2-1/2 |
63.5 |
4 |
3.240 |
82.3 |
1.87 |
0.85 |
350 |
24.1 |
* |
100 |
N |
SS106-3000 |
3 |
76.2 |
4 |
3.740 |
95.0 |
2.53 |
1.15 |
350 |
24.1 |
* |
100 |
N |
SS106-4000 |
4 |
101.6 |
6 |
5.000 |
127.0 |
4.47 |
2.03 |
350 |
24.1 |
* |
100 |
N |
|
 |
LP Gas Hose
Stainless Steel Reinforced – Rubber Cover UL21
Series 7233
Series 7233 is a rubber covered, small diameter, extremely durable liquefied petroleum gas (LPG)/propane transfer hose for applications such as fuel line hose on forklifts and utility equipment. The hose meets all Underwriter Laboratories (UL21) requirements. The construction incorporates high tensile stainless steel braided reinforcement for superior strength, durability and kink resistance. The perforated rubber cover is resistant to mild chemicals, oil and ozone. Series 7233 is qualified with Parker crimp couplings and is compatible with Parker Series 20 reattachable fittings.
Series 7233 and Natural Gas: The molecules of natural gas are small, enhancing their ability to permeate through standard rubber hose constructions. The permeation process is more rapid as the working pressure increases, and natural gas accumulates with potentially dangerous consequences. Series 7233 may be used for natural gas service, but ONLY under ALL of the following conditions:
- The application must be in a well-ventilated environment: Outdoors, or indoors with significant continuous air movement.
- Series 7233 is not to replace fixed/rigid pipe where that material is more appropriate due to reduced permeation and overall strength and durability. Use rigid pipe, nonpermeable tubing or hose with barrier constructions to convey natural gas whenever possible.
Series 7233 and Compressed Natural Gas (CNG): Series 7233 is not to be used for any CNG application, including fuel dispensing, on-board vehicle fuel lines, or fuel transfer.
Tube: Black nitrile
Reinforcement:One stainless steel braid
Cover: Black chloroprene; perforated wrapped finish
Temp. Range:-40°F to +180°F (-40°C to +82°C) (The hose construction is capable of this rating, but LP Gas should NEVER be conveyed over 140°F/60°C)
Brand Method: Embossed
Brand Example:PARKER SERIES 7233 SS CAUTION LP GAS HOSE U ® ISSUE NO. XXXX 350 PSI MAX WP 1750 PSI MIN BURST (DATE CODE)
Design Factor: 5:1
Industry Standards: UL21
Applications:
- LP gas/propane
- Fork lifts, utility equipment
Vacuum:Not recommended
Packaging: Reels
Part Number |
ID (in) |
ID (mm) |
Reinf Plies |
OD(in) |
OD (mm) |
Approx Wt (lbs/ft) |
Approx Wt (kg/ft) |
Min Rec Rad (psi) |
Min Rec Rad (bar) |
Max Rec WP (psi) |
Max Rec WP (bar) |
Perm Cplg Rec * |
Std Pack Qty (ft) |
Stock Status ** |
7233-311 |
5/16 |
7.9 |
1 |
0.675 |
17.1 |
0.19 |
0.09 |
4.0 |
101.6 |
350 |
24.1 |
HY |
500 |
Y |
* Permanent Couplings: Refer to CrimpSource at www.safehose.com for coupling recommendations and crimp specifications. Reattachable Couplings: Parker Series 20.
** Stock: “Y” indicates stocked item; “N” indicates non-stocked item. Stock status subject to change. Contact Parker Customer Service.
|
LP Gas Hose
Stainless Steel Reinforced – Textile Cover UL21
Series 7243
Series 7243 is a textile-covered, small diameter, extremely durable liquefied petroleum gas (LPG)/propane transfer hose in applications such as fuel line hose on forklifts and utility equipment. The hose meets all Underwriter Laboratories (UL21) requirements. The construction incorporates high tensile stainless steel braided reinforcement for superior strength, durability and kink resistance. The textile cover is resistant to abrasion, mild chemicals, and ozone. Series 7243 is qualified with Parker crimp couplings and is compatible with Parker Series 20 field reattachable fittings.
Series 7243 and Natural Gas: The molecules of natural gas are small, enhancing their ability to permeate through standard rubber hose constructions. The permeation process is more rapid as the working pressure increases, and natural gas accumulates with potentially dangerous consequences. Series 7243 may be used for natural gas service, but ONLY under ALL of the following conditions:
- The application must be in a well-ventilated environment: Outdoors, or indoors with significant continuous air movement.
-
Series 7243 is not to replace fixed/rigid pipe where that material is more appropriate due to reduced permeation and overall strength and durability. Use rigid pipe, non-permeable tubing or hose with barrier constructions to convey natural gas whenever possible.
Series 7243 and Compressed Natural Gas (CNG): Series 7243 is not to be used for any CNG application, including fuel dispensing, on-board vehicle fuel lines, or fuel transfer.
Tube: Black nitrile
Reinforcement: One stainless steel braid
Cover: Black chloroprene-impregnated textile braid
Temp. Range: -40°F to +180°F (-40°C to +82°C) (The hose construction is capable of this rating, but LP Gas should NEVER be conveyed over 140°F/60°C)
Brand Method: White ink with white dash/spiral stripe
Brand Example:Side one: PARKER SERIES 7243 SS CAUTION LP GAS HOSE MH6737 U ® ISSUE NO. XXXX 350 PSI MAX WP (DATE CODE)
Side Two: CAUTION FOR LP GAS USE ONLY 1750 PSI MIN BURST
Design Factor: 5:1
Industry Standards: UL21
Applications:
- LP gas/propane
- Fork lifts
Vacuum:Not recommended
Compare to: Gates Stainless Steel LPG
Packaging:Reels
Part Number |
ID (in) |
ID (mm) |
Reinf Plies |
OD(in) |
OD (mm) |
Approx Wt (lbs/ft) |
Approx Wt (kg/ft) |
Min Rec Rad (psi) |
Min Rec Rad (bar) |
Max Rec WP (psi) |
Max Rec WP (bar) |
Perm Cplg Rec * |
Std Pack Qty (ft) |
Stock Status ** |
7243-251 |
1/4 |
6.4 |
1 |
0.581 |
14.8 |
0.13 |
0.06 |
1.7 |
43.2 |
350 |
24.1 |
HY |
500 |
N |
7243-311 |
5/16 |
7.9 |
1 |
0.675 |
17.1 |
0.18 |
0.08 |
2.0 |
50.8 |
350 |
24.1 |
HY |
500 |
Y |
7243-401 |
13/32 |
10.3 |
1 |
0.766 |
19.5 |
0.21 |
0.10 |
2.3 |
58.4 |
350 |
24.1 |
* |
500 |
N |
7243-501 |
1/2 |
12.7 |
1 |
0.922 |
23.4 |
0.29 |
0.13 |
2.8 |
71.1 |
350 |
24.1 |
* |
500 |
N |
|
LP Gas Hose
UL569, CSA
Series 7170
Series 7170 is a flexible, lightweight hose connector for transfer of liquefied petroleum gas (LPG)/propane in barbecue grills, portable heaters, weed burning apparatus and similar appliances. The hose meets all Underwriters Laboratories (UL569) and Canadian Standards Association (CSA) requirements. The construction incorporates multiple textile plies of reinforcement for flexibility and kink resistance. The perforated cover is resistant to mild chemicals, oil and ozone.
Series 7170 and Natural Gas: The molecules of natural gas are small, enhancing their ability to permeate through standard rubber hose constructions. The permeation process is more rapid as the working pressure increases, and natural gas accumulates with potentially dangerous consequences. Series 7170 may be used for natural gas service, but ONLY under
ALL of the following conditions:
- The application must be in a well-ventilated environment: Outdoors, or indoors with significant continuous air movement.
- Series 7170 is not to replace fixed/rigid pipe where that material is more appropriate due to reduced permeation and overall strength and durability. Use rigid pipe, nonpermeable tubing or hose with barrier constructions to convey natural gas whenever possible.
Series 7170 and Compressed Natural Gas (CNG): Series 7170 is not for used in any CNG application, including fuel dispensing, on-board vehicle fuel lines, or fuel transfer.
Tube:Black nitrile
Reinforcement:Multiple textile plies
Cover:Black chloroprene; perforated smooth finish
Temp. Range: -40°F to +180°F (-40°C to +82°C) (The hose construction is capable of this rating, but LP Gas should NEVER be conveyed over 140°F/60°C)
Brand Method: Impression
Brand Example:PARKER SERIES 7170 (ID) CSA ® CAN 1–8.1 – CAUTION – LP GAS HOSE 5 PSI/350 PSI C U ® US MH11955 MADE IN USA (DATE CODE)
Design Factor: 5:1
Industry Standards:UL569; CAN/CGA-8.1-M86 Type I
Applications:
- LP gas/propane
- Cookers, grills, heaters, weed burners, small appliances
- Consumer, general industrial
Vacuum:Not recommended
Compare to:Thermoid Type 75
Packaging:Reels
* Couplings: Refer to CrimpSource at www.safehose.com for coupling recommendations and crimp specifications.
** Stock: “Y” indicates stocked item; “N” indicates non-stocked item. Stock status subject to change. Contact Parker Customer Service.
Part Number |
ID (in) |
ID (mm) |
Reinf Plies |
OD(in) |
OD (mm) |
Approx Wt (lbs/ft) |
Approx Wt (kg/ft) |
Min Rec Rad (psi) |
Min Rec Rad (bar) |
Max Rec WP (psi) |
Max Rec WP (bar) |
Perm Cplg Rec * |
Std Pack Qty (ft) |
Stock Status ** |
7170-25354 |
1/4 |
6.4 |
4 |
0.610 |
15.5 |
0.16 |
0.07 |
2.5 |
63.5 |
350 |
24.1 |
7661 |
750 |
Y |
7170-38354 |
3/8 |
9.5 |
4 |
0.760 |
19.3 |
0.22 |
0.10 |
3.5 |
88.9 |
350 |
24.1 |
HY |
600 |
Y |
|
LP Gas Vapor Hose
Series 7122
Series 7122 is a flexible, lightweight, light duty hose connector for transfer of LP Gas vapor in space heaters for chicken brooders and other light applications. The hose construction incorporates multiple textile plies of reinforcement for flexibility and kink resistance. The perforated cover is resistant to mild chemicals, oil and ozone.
-
Do not use to transfer liquid LP gas, in gas grill or other applications requiring Underwriters Laboratories (UL) or Canadian Gas Association (CGA) performance or listing.
- Refer to the Safety and Technical section of this catalog for safety, handling and use information.
Series 7122 and Natural Gas: The molecules of natural gas are small, enhancing their ability to permeate through standard rubber hose constructions. The permeation process is more rapid as the working pressure increases, and natural gas accumulates with potentially dangerous consequences. Series 7122 may be used for natural gas service, but ONLY under ALL of the following conditions:
- The application must be in a well-ventilated environment: Outdoors, or indoors with significant continuous air movement.
- Series 7122 is not to replace fixed/rigid pipe where that material is more appropriate due to reduced permeation and overall strength and durability. Use rigid pipe, nonpermeable tubing or hose with barrier constructions to convey natural gas whenever possible.
Tube: Black nitrile
Reinforcement: Multiple textile plies
Cover: Red chloroprene; perforated smooth finish
Temp. Range: -20°F to +160°F (-29°C to +71°C) (The hose construction is capable of
this rating, but LP Gas should NEVER be conveyed over 140°F/60°C)
Brand Method: Black ink
Brand Example:PARKER SERIES 7122 LPG VAPOR HOSE 125 PSI MAX WP MADE IN USA (DATE CODE)
Design Factor:4:1
Industry Standards: None applicable
Applications:
- LP gas ??? vapor ONLY
- Chicken brooders, space heaters
- Agriculture, light industrial
Vacuum: Not recommended
Compare to:Gates LPG Vapor
Packaging:Reels
Part Number |
ID (in) |
ID (mm) |
Reinf Plies |
OD(in) |
OD (mm) |
Approx Wt (lbs/ft) |
Approx Wt (kg/ft) |
Min Rec Rad (psi) |
Min Rec Rad (bar) |
Max Rec WP (psi) |
Max Rec WP (bar) |
Perm Cplg Rec * |
Std Pack Qty (ft) |
Stock Status ** |
7122-38200 |
3/8 |
9.5 |
2 |
0.656 |
16.7 |
0.15 |
0.07 |
3.8 |
96.5 |
125 |
8.6 |
HY |
700 |
Y |
|
|
