Falcon Pd® Belts

Javascript DHTML Drop Down Menu Powered by dhtml-menu-builder.com

Falcon Pd® Belts

The star of our reinforced rubber power transmission belt portfolio

Falcon Pd® is quickly setting the new standard in synchronous drive system belting. When compared to conventional polyurethane synchronous belts, the benefits of Falcon Pd® become evident.

Specialty compounded materials give this belt superior advantages

The ability to operate continuously in temperatures up to 2100F (98.90 C) and withstand peak temperatures as high as 3000F (148.90 C), along with being static conductive, help Falcon Pd® perform in special applications, providing longer life and higher output to meet your needs.

Lower maintenance costs reduce the pain

Falcon Pd® synchronous belts do not require lubrication often found in chain drive applications. High-modulus cord members minimize the need for retensioning normally required in standard V-belts, reducing your overall maintenance cost.

Quiet operation

Falcon Pd® runs quieter, up to 6dB in operation for a better environment while offering advanced flex-fatigue resistance to help extend belt life.

Applications

Any application where a chain drive could be used.

Can also be used with a backside idler when needed, allowing for additional applications.

Suitable for high horsepower, low torque drives.

Key features & benefits

• Increased horsepower rating up to 36%
• Increased continuous operating temperature up to 2100F (98.90 C)

• Size for size convenience (example: 8GTR-640-21=Gates 8 MGT®-640-21*)
• Static conductive**
• Reduced operating noise levels to comparable belt drives
• Exceptional tensile strength for premium performance
• Rubber construction provides better resistance to flex fatigue
• Versatility in a wide range of operating temperatures

* Contact customer service for availability. Gates, Poly Chain and GT are trademarks of the Gates Corporation.

** Drive conditions and service variables in combination with time in operation can result in a loss of static conductivity. It is recommended that a conductivity check be added to drive preventive maintenance programs where belt static conductivity is a requirement.

8mm pitch

14mm pitch